Advanced corona and plasma power supplies and generators | HV-X series

Tantec Power Generator HV-X is a new series of advanced corona and plasma power supplies, versatile for stand-alone surface treaters or as a fully integrated treater component in automated lines built by OEM’s.

For stand-alone treaters the HV-X Power Supply series is either controlled by an operator interface control with a 5.7” graphic touch display including a built-in PLC with 16 inputs and 16 outputs and RS485 Modbus port for data management or via a hard wired PLC interface.

For OEM’s the standard RTU 4-Wire Modbus control offers a unique communication platform. Profibus, CANopen and others are optional and require a separate protocol converter to provide instant bus connectivity, i.e. Anybus Communicator.

Generator HV-X02, HV-X10 and HV-X20

HV-X power generators are available with 200, 1000 and 2000 Watt power output, and operate with 17 different high voltage transformers in configurations ranging from 2 kV up to 80 kV output voltage.

This extensive span provides surface treatment solutions for all products regardless of part size, shape or capacity.

Control modes:
Simple mode: Only the very basic parameters can be adjusted using the knob and the LCD display on the front panel.
Modbus (Standard): Full parameter controlling incl. setting, storing, verification and surveillance of all parameters. (Profibus, CANopen and other bus controls are optional).
Operator interface control, Tantec Remote-X. (Optional): Full parameter controlling incl. setting, storing, verification and surveillance of all parameters.
PLC configuration (Standard): Via main machine PLC or similar central control the most important parameters can be controlled and adjusted.
Other features:
Output discharge control: Either voltage or power limitation.
Watt density control: Based on parts/min., m/min. or m2/min. (Bus/Operator Interface Control mode only).
Advanced treatment: Timer with 5 modes, 0.02-60 seconds.
Electrode matching: 70, 80, 90 and 100%.
Technical Specifications HV-X02 HV-X10 HV-X20 HT-Transformers
Mains voltage and frequency 100-240 VAC 50/60 Hz 100-240 VAC 50/50 Hz 100-240 VAC 50/50 Hz 400 V
Output voltage/power Max. 400 V/0-200 Watt Max. 400 Vp/0-1000 Watt Max. 400 Vp/0-2000 Watt (110 V: Max. 1500 Watt) 1–40 kV (17 types)/0-2000 Watt
Power consumption 300 VA 1200 VA 2150 VA 0-2000 Watt
Ramp up time 5-30 ms, depending on power load 5-30 ms, depending on power load 5-30 ms, depending on power load 5-30 ms, depending on power load
Shut down time <1 ms <1 ms <1 ms <1 ms
Dimensions in mm (LxWxH) 430 x 470 x 200 430 x 470 x 200 430 x 470 x 200 210 x 164 x 218 (Dry) | 242 x 242 x 267 (Oil)
Weight in kg 12.5 12.5 14.5 5-11 kg, depending on type of transformer
Operator Interface Control 5.7” STN color touch display 5.7” STN color touch display 5.7” STN color touch display
(Optional) Ports: (1) USB – (1) Ethernet – (1) Serial RS485 Ports: (1) USB – (1) Ethernet – (1) Serial RS485 Ports: (1) USB – (1) Ethernet – (1) Serial RS485  N/A
Bus communication system Standard: RTU 4-Wire Modbus, 57.6Kbaud, 8bit. Optional: CANopen/Profibus and others Standard: RTU 4-Wire Modbus,57.6Kbaud, 8bit. Optional: CANopen/Profibus and others Standard: RTU 4-Wire Modbus,57.6Kbaud, 8bit. Optional: CANopen/Profibus and others  N/A
Regulation compliance CE – RoHs – WEEE CE – RoHs – WEEE CE – RoHs – WEEE CE – RoHs – WEEE