Atmospheric Plasma Genrator | PlasmaTEC-X | Highly improved features
A Daisy Chain system is offered where any combination of 1-8 PlasmaTEC-X Plasma Generators can be controlled through a single control unit – the PlasmaREMOTE HMI unit. The units can be controlled individually through conventional relay system or from the Digital interface as a group with the same master signal.
Tantec’s latest feature now being offered is “Stand-By air low.” Through the HMI an operator can set an air flow during stand-by to avoid dust being attracted to the discharge head.
All connections from the PlasmaTEC-X Plasma Generator to the discharge nozzle is made through a standard plug, making it very easy to connect and use. Thanks to the DC technology and the AirTEC system no adjustments are necessary in case of cable length changes.
FEATURES | |
Easy to install The system must be connected to mains power and compressed air, no adjustment of air or power is necessary. |
Standby air flow The air flow is controlled electronically which allows for switching the on/off, A minor flow of air is part of stand-by, to avoid dust being attracted to the discharge nozzle. |
Potential free discharge Allows treatment of both conductive, non-conductive as well as semi-conductive surfaces. |
Compact and Light weight Compact and light weight makes the PlasmaTEC-X easy to integrate in almost any production line or robot cell. |
High speed production High power Plasma Discharge allows for high line speeds. |
Output discharge control Should the power drop below a pre-set level, the generator offers necessary alarm signals. |
Control signals A large number of various signals are available on a digital interface to control and monitor the Plasma discharge at all times. |
PlasmaREMOTE A HMI Control unit offers easy control and adjustment of parameters. The HMI Control unit can monitor and control from 1-8 units of the PlasmaTEC-X. |
Automatic discharge air regulation No matter the length of the power/air cable, the Plasma generator will adjust automatically to ensure the correct air pressure and flow. |
Technical Specifications | PlasmaTEC-X Generator | PlasmaREMOTE | PlasmaTEC-X Nozzle |
Mains voltage and frequency | 100-250VAC – 50/60Hz (Universal power input) |
N/A | N/A |
Output voltage/power | 550VA | N/A | 425watt |
Ramp up time | 10 ms | N/A | N/A |
Shut down time | < 1 ms | N/A | N/A |
Control interface | M12 (8 pole) | M12 (4 pole) | N/A |
Dimensions (WxLxH) mm | 150x470x198 | 125x169x167 | OD30x206 |
Weight in kg | 6,1 | 2,0 | 1,1 (w. 2 mtr hose) |
Treatment width in mm | N/A | N/A | 6-12 mm |
Compressed air supply | 5-6 bar, dry and clean | N/A | N/A |
Compressed air connection | OD8mm Quick connection |
N/A | N/A |
Air consumption | N/A | N/A | 33 ltr/min |
Units per PlasmaREMOTE | N/A | 1-8 PlasmaTEC-X generators |
N/A |
Regulation compliance | CE – RoHs – WEEE | CE – RoHs – WEEE | CE – RoHs – WEEE |